The Luxator extraction instrument product range enhances the outstanding selection of high-quality extraction instruments from Directa. Modern techniques such as implants require instruments and equipment offering possibilities to achieve fast healing and placement of direct implants after extraction.
What is the origin of the name Luxator?
Luxator comes from the verbiage "to luxate"meaning to "loosen, dislodge" (a tooth from its socket).
What is the difference between Luxator Periotome and Luxator Forte?
Luxator Periotomes are used to cut the periodontal ligaments and by doing so loosen the tooth. Luxator Forte lifts (elevates) the tooth.
How can I see the difference between Luxator Periotome and Luxator Forte?
Luxator Periotomes come in light handles (grey, pale blue, or pale yellow) while the Luxator Forte comes in a black handle. The blade also differs.
What happens if I elevate with a Luxator Periotome?Luxator Periotome is a surgical instrument specially designed for extraction by vertical luxation, correctly used as an indispensable instrument in every dental clinic. The tip of the instrument is very thin and sharp to be inserted into the periodontal space between bone and tooth, cut off the ligaments, and at the same time compress the alveolar bone. To bend, chip, or otherwise damage the tip strong elevation forces are required that may not occur by regular vertical luxation. Should such forces be applied there will be damage to the cheekbone before damage to the tip is made. Luxator Periotomes are not intended for use as elevators! Any kind of use for leverage will result in damages to the tip. The surgical tip is made of hardened stainless special steel specifically developed for surgical instruments thus making a very strong instrument despite the precision thin tip. The hardening process also gives excellent durability to the sharpness of the instrument. In order to meet the demand for elevating techniques, Directa developed Luxator Forte which is specially designed for tooth elevation.
When should I use the different Luxators?Examples of use for Luxator Periotome, Titanium, and Short Periotome:
L1S: Apical and/or interproximal (L1S is extremely sharp and delicate, use with caution)
L2S, S2S: Apical and/or interproximal
L3C, S3C: General use/starter
L3S, S3S, L5S, S5S: Interproximal
L3CA, S3CA: lingual and/or distal - molars
L3IC: General, lingual, and/or distal
L5C: Large molar roots - general use
Examples of use for Luxator Dual Edge PeriotomeDE3, DE5: Deep fractured and decayed roots. (DE3 is extremely sharp and delicate, use with caution)
Examples of use for Luxator Forte Elevator
F25, F32, F32C, F40: Elevation
Why should I choose a curved rather than a straight periotome?Depending on the tooth to loosen a curved periotome might guarantee better access.
How do I sharpen a Luxator?A special sharpening stone is available, suitable for all Luxator instruments from 1mm periotomes to Forte. To sharpen a periotome, place the concave surface of the tip of the blade on the sharpening stone and stroke away. Lift the blade after each stroke and repeat until the blade is sharp. The stone should always be lubricated with sharpening oil or water to avoid clogging the surface with debris. To obtain optimal results, sharpen the instrument on a regular basis using a Luxator sharpening stone. Sharpen the instrument after a thorough cleaning, before sterilization.
What material is Luxator made of?
Stainless Steel, Polyamide PA6.6. Luxator Titanium: titanium nitride-coated stainless steel.
What are the maintenance, cleaning, and sterilization of the Luxator extraction instruments?Warnings: None
Limitations on reprocessing: No limitations. End of life is determined by wear not the number of reprocessing cycles.
Preparation at Point of Use: Remove debris with disposable paper or cloth. Biological debris should not dry up.
Decontamination:- Manual cleaning and rinsing: Not recommended.
- Automated cleaning: Dishwasher. Cleaning agent: Low alkaline and biocompatible. Follow instructions and observe concentrations given by the supplier. Temperature/ time: 65°C recommended/40 min.
- Ultrasonic baths: Cleaning agent: Low alkaline and biocompatible. Follow instructions and observe concentrations given by the supplier. Temperature/ time: 35kHz- 50 kHz / >= 3 min
Disinfection: - Washer disinfector/Thermal (automated) and drying: Cleaning agent: Low alkaline and biocompatible. Follow instructions and observe concentrations given by the supplier. Min temperature/min time: +80° C / 10 min. +90°C / 1 min. +93°C /30 sec.
Sterilization:
- Steam autoclave: Pack in a sterile bag. Cycle: 134-137°C for 3 min. (273°F) Recommended, higher safety margin. 126°C for 10 min. 121°C for 15 min.
- Dry Heat: Not recommended. Affect the product. The metal becomes softer after continued heat sterilizations.
- Chemklave: Not recommended. The colors may fade after several sterilizations.
Additional information: Use Fixus to hold the instrument during the cleaning process and storage. This prevents damage to the tip and reduces the risk of injuries to personnel. Chemical disinfection is NOT recommended.
