Is it possible to perform restorations of two adjacent cavities, mesial and distal at the same time?Yes, the strength of the myRing Forte is sufficient for a proper teeth separation, allowing to compensate the thickness of two matrices – However in this case we recommend the use of ultrafine matrices with a thickness of only 0.025mm – Moreover, the design of the tines makes it possible to clamp the matrix in an optimal way both on the mesial and distal walls.
How to autoclave: in one piece or separately?According to the cleaning and sterilization guides, all detachable components of the devices must be disassembled. The myTines must be removed from the ring.
Can I refit the ring in case of deformation?Should myRing Forte deforms due to incorrect use, it can be reconditioned using the special ring notches on the forceps myForceps.
Does it keep the separation force?Yes, the double spring geometry of myRing Forte has been studied specifically to retain the separation force and avoid the deformation of the ring.
Can I perform MOD cavity restorations with myRing Forte?Yes, you can use myRing Forte for MOD cavity restorations. The geometry of the sectional system has been specially developed to allow the use of two rings at the same time.
How should I place the matrix?The matrix should be “smiling”. It should be used with the extremities facing upwards. (Like the letter U).
How many times can the tines be used?The tests show a resistance of the material of about 50 autoclave cycles. However, it depends on the way in which they are used.
Do myTines break easily?myTines have been developed not to break easily and resist multiple uses. However, the plastic material has a limited life cycle, which is why they can be replaced.
What is the material of the tines?Autoclavable thermoplastic polymer.
What is the myRing Forte made of?Stainless steel.
Is myRing Forte made of plastic?No, only myTines are made of plastic while the ring body is made of stainless steel with a surface colouring treatment.
Are your matrices disposable or re-usable?Matrices are always single-use since they are shaped on a case by case basis. Moreover, in case of steel matrices, they can lose their shape during extraction.
Do the matrices have a non-stick treatment?No, however thanks to the very high quality of the steel used to produce our matrices, the extremely smooth surface prevents the adhesion of composite / ionomer glass to the matrix.
What are the advantages of using a sectional matrix over a Tofflemire matrix band?The curved and anatomical shape of the sectional matrices, in combination with the clamping action of the ring, allows for an optimal reproduction of the original proximal anatomy of the contact point.